Info - Camera Accessories

• Related Articles

• SW Install - CP4 with 4G Camera

  Before installing your device, please document your device serial number. You will need this information at a later time to verify your installation. After completing the installation, please submit the installation details through the following ...

• Power Voltage needed for Camera to be turned on

  Power Voltage All of our camera's need 12 V of Constant power in order to turn on. If you have less than 12 V of Direct power, please ensure that the device is connected properly.

• ADAS Camera Connectivity Troubleshooting Guide.

  ADAS Camera Connectivity Troubleshooting Guide Connectivity Issue: Through this segment, we can check if the device is connecting to the network and showing the live view on the portal or not. To check for connectivity issues you need to download the ...

• Smartwitness Camera Basic troubleshooting steps

  This article explains how to complete basic troubleshooting steps for a SmartWitness camera. Steps Follow below troubleshooting steps:       1. Turn off the ignition.       2. Remove the SD card and re-insert it back       3. Remove the SIM card and ...

• Z6 Camera - Adding an APN from a QR code

  This article will explain how to add an APN from a QR code:  An Access Point Name (APN) provides information from your network provider that enables the AI-12 dashcam to connect to the internet. Accoun IMPORTANT NOTE: To add an APN from a QR code, ...