ZenduCAM Client Portal
SurfSight Z6 - How to set the dashcam viewing angles
To set the view angles: When you are in the parked vehicle with the parking brake on, the ignition on, and the door closed, press the touchscreen of the dashcam to view the PIN screen. Enter the default PIN 3333 to unlock the dashcam for the first ...
SurfSight: How install auxiliary cameras?
Here are some ways how to connect aux camera WiFi auxiliary cameras WiFi auxiliary cameras pair to the dashcam through WiFi, and do not need to be physically connected to a router. Using WiFi makes installation easier. In unobstructed environments we ...
How to add Geofences to the ZenduCam portal ?
This article explains how to add Geofences to the ZenduCam portal. Add Geofences Navigate to the “Admin” tab from the top navigation bar. Select “Geofences” from the side navigation bar. Click “Create Zone”. Provide relevant information for the ...
How to access reports in the ZenduCam portal ?
This article explains how to access reports in the ZenduCam portal. Jobs Trips Report Navigate to the “Insights” tab from the top navigation bar. Select “Jobs Trips” from the side navigation bar. Filter the report by either vehicles or jobs. (“Jobs” ...
How to add products to the ZenduCam Portal ?
This article explains how to add products to the ZenduCam Portal. Add products Navigate to the “Admin” tab from the top navigation bar. Select “Products” from the side navigation bar. Click “Create Product”. Provide the relevant details of the ...
How to edit a job and complete a job in the ZenduCam portal ?
This article explains how to edit a job and complete a job in the ZenduCam portal. Edit a Job Click on the job from the Jobs board. Click “Edit” within the “Details” tab. You will be able to edit all of the job details, stops, forms, etc. You can ...
How to view a Job in the ZenduCam portal?
This article explains how to view a Job in the ZenduCam portal. Note: You can view jobs, their status, and other relevant details from the job board. Navigate to the job board by clicking on the “Jobs” tab in the header. You can find specific jobs ...
How to create a job in the ZenduCam portal ?
This article explains how to create a job in the ZenduCam portal. Job Details Click the “Add Job” button in the top right corner of the “Jobs” home screen. Enter the name of the job in the mandatory “Job Name” field. Enter the internal reference ...
How to Supervisor can create a Job in ZenduCam ?
Introduction: This article will guide you through with a step-by-step procedure to create the Jobs for the drivers through the supervisor in ZenduCam. Procedure: Job Details Click the “Add Job” button in the top right corner of the “Jobs” home ...
Zenducam - Disable Audio Alerts
How to disable audio alerts on zenducam devices: Step 1 Step 2 Step 3 Then save configuration.
Change User from Driver to User
Procedure: Login to ZenduCAM Navigate to Admin Click on Users Click on Drivers: Click on Edit: Enable/Disable the Driver Option: Click on Save:
Viewing your Vehicle/Camera on the map
The Map tap is the default tap that is shown once you log into ZenduCAM. It will show the map, and all the vehicles in your fleet. For more information about any one vehicle, click on the desired vehicle in the tab on the left. This will zoom the map ...
Managed Service in ZenduCAM
This article will cover how to set up your rules for managed service (independent reviewers). Step 1: Log into ZenduCAM and head over to your rules, selecting the rule you wish to set up. Step 2: Under the Actions tab, select "Send ...
Adding a Globalstar device on Zenducam/Gofleet
This article illustartes the step by step method of adding Globalstar devices Login to Zenducam Click on Admin Go to Devices Hit “Create device” Enter all necessary information Tracker type - Globalstar Enter Globalstar ESN Save Device at the bottom
Proximity Via Map Feature
Agent: Morgan The Proximity features allow you to select a section of the map and see which vehicles were near it at the desired time. To start, right-click the area on the map you wish to check and select find proximity. Then select the range of ...
ZenduCAM- Add/Delete groups
This article will explain how to add, edit and delete groups in ZenduCAM. Steps Adding a Group: 1. Login to the ZenduCAM portal 2. Go to the 'Admin' tab 3. Click on the 'Create Group' button 4. Enter the group name in 'Input ...
Creating Users in ZenduCAM
his article explains how to create users in ZenduCAM. Steps To create/edit users, head to: 1. Admin 2. Users 3. Create User UserName: Has to be an email Email: Their email First Name: This is required Last Name: Their last name ...
Setting up Rules in ZenduCAM
You can set up certain rules that will trigger the camera to record/upload a video when the rule is broken. 1. Head to the Admin tab and select the rules tab and click on "add new rule" 2. Give your rule a name and select which ...
ZenduCAM - Set exception email notification to be sent to certain email
This article explains the steps to take to set an exception email notification to be sent to a certain email address. Steps Follow the steps below to enable the event notification. 1. Open ZendCAM add-in/ ZenduCAM stand-alone application ...
Logging into ZenduCAM
This article explains how to log into ZenduCAM. You can log in to your zenduCAM/Trax database here: trax.zenduit.com If you have a Geotab database, you can log in through Geotab via the ZenduCAM application You do not need to log in again if you're ...
Color Indication Under Vehicle Name in Maps Tab
This article explains the meaning of each colour indicator under Vehicle name in the Maps tab. Color Indication Blue Color Indicates Truck is travelling, but camera is offline Green Color Truck is moving, and Camera is online/Recording Yellow Color ...
ZenduCAm - Link Geotab unit with the camera unit
This article explains how to sync the Geotab unit with the camera unit. Steps Please follow the below steps to sync Geotab devices with the camera units. 1. Login to Geotab 2. Go to ZenduCAM add-in 3. Select Admin tab > Devices ...
From where can we see the last video stored in device from ZenduCAM Portal
Login to the Portal Click on Insights Select Status Search for the device name Check the Oldest Video Time for the last recorded video, for the specific device. You have successfully viewed the last recorded video for the specific device.
Setting up reports on ZenduCAM
This article explains how to set up reports on ZenduCAM, as well as the type of reports available. Steps To set up reports on ZenduCAM 1. Login to "ZenduCAM" 2. Click on "Admin" 3. Select "Scheduled reports" on the left-hand side ...