ZenduSensor TSTH1-B

ZenduSensor TSTH1-B

Installation Video



ZenduSensor TSTH1-B Installation Guide




TSTH1-B

The sensor is using BLE 5.0 technology and could detect temperature, humidity and light then send them to the tracker/Phone via BLE. It provides the customer with a cost-effective, efficient and safe environment remote monitoring method. It’s suitable for using in commercial cold-chain transport/storage and other segments.




How to power on


  1. Open the lid of the sensor.

  2. Remove the plastic belt under the battery.

  3. Make sure the rubber ring in its correct position and close lid tightly.

  4. Remove the sticker on the lid.


    • Related Articles

    • Getting Started with MyInstallHub App

      1. Sign-up Sign up as an Installer at Register Link or directly from the app on Google Play or App Store. 2. Downloading the App & Logging in - Download the app using the following links: a. For iPhone users, MIH Validation App on App Store: ...
    • Diagnostic Box - Specification Sheet

      DOWNLOAD PDF
    • Wireless BLE Relay Installation Guide

      Table of contents Installation Guide: Wireless BLE Relay with Asset Trackers Overview This guide explains how to install and wire a wireless BLE relay for remote control of fuel pumps or starter circuits via an asset tracker. The solution enables ...
    • Geotab - Installation Guide

      Installation Video GO9+ device Geotab’s GO9+ telematics device builds on the class-leading GO9 with the added benefit of a CAT4 cellular modem (available on all GO9+ versions) and on-board Wi-Fi hotspot (not available on the GP9-LTETENG). Similar to ...