ZenduCAM Z6 - Manual sd card FW update

ZenduCAM Z6 - Manual sd card FW update 3.9.79

This Guide illustrates the step-by-step method of sd card firmware update

Steps:

  1. Download the full_AI-23_3.9.79.zip file (at https://upgrades.surfsight.net/3.9.79/full_AI-12_3.9.79.zip) and save it on your computer as update.zip.

NOTE: on most Windows OS versions, you will not see the .zip file extension in the file name because, by default, Windows hides extensions for known file types. So, when you rename the file, please ensure you don’t add extra .zip at the end of it

       2.     Take an SD card previously formatted by the AI-12 camera, connect it to your computer, and copy the update.zip file to this SD card.

NOTE: on the SD card, don’t create any new folders

       3. Eject the SD card from the computer, insert it into the camera, and turn the camera on


       4.  As soon as the device starts running, it will detect the update file on its SD card and automatically initiate the update process. The camera’s screen will stay black for a couple of minutes – just wait until the device reboots and starts showing the white car’s icon again.

               NOTE: o   if during the update process you get the Android OS's fast boot screen (i.e., a weird screen with text info), click the SOS button of the camera to exit it.

o   after updating the first camera, you can reuse the same SD card to update other devices.


    • Related Articles

    • Update CP4 Firmware

      Please contact support for the Lasted firmware update This article explains how to update the firmware for CP4. Steps Download the CP4 Configuration Tool Open the Configuration Tool software Press the 'Initialize SD Card' button Choose the SD card ...
    • SurfSight/Z6 camera - Manual Firmware update

      This article explains how to update Surfsight/Z6 camera Firmware manually. Steps Follow the below steps to update the Firmware on the SD card Remove the SD card from the camera and insert the SD card into the Desktop/Laptop Select the SD card folder, ...
    • Setting up reports on ZenduCAM

      This article explains how to set up reports on ZenduCAM, as well as the type of reports available. Steps To set up reports on ZenduCAM       1. Login to "ZenduCAM"       2. Click on "Admin"       3. Select "Scheduled reports" on the left-hand side   ...
    • Insert the SIM and SD cards into the dashcam

      Procedure: To install the SIM and SD cards: Use the special screwdriver included in the box when you purchased the dashcam to remove the safety screws that lock it. Insert the SIM and SD cards, as needed NOTE: Only insert a microSIM card. If you ...
    • Close SD door

      Procedure: Please see the below image and ensure that the SD door locking switch is closed.