Viewing your Vehicle/Camera on the map
The Map tap is the default tap that is shown once you log into ZenduCAM. It will show the map, and all the vehicles in your fleet.
For more information about any one vehicle, click on the desired vehicle in the tab on the left. This will zoom the map into the vehicle's current location and open the trips tab.
The default time frame you're viewing the data in is the current week. To change this, click on the calendar. To view the trip data, click on the day you wish to view. This will draw all the trips for that day on the map.
Related Articles
Adjusting the Viewing Angle of the AI-12 - ZenduCAM Z6
Follow this article step by step in order to adjust the viewing angles of both the road and cabin-facing cameras. Steps Dismount the AI-12 camera from the mounting bracket on the windshield. Make sure that the mounting bracket is not attached, as it ...Z6 Camera Specifications
Element Description Network data Global band Micro-SD 0.59" x 0.47" x 0.029" (15 x 12 x 0.76mm) WiFi Ability to act as hotspot or connect to WiFi Access Point GPS GPS AGPS Road-facing camera 1080P HD adjustable FOV(D)140° wide-angle camera ...SurfSight Z6 - How to set the dashcam viewing angles
To set the view angles: When you are in the parked vehicle with the parking brake on, the ignition on, and the door closed, press the touchscreen of the dashcam to view the PIN screen. Enter the default PIN 3333 to unlock the dashcam for the first ...Proximity Via Map Feature
Agent: Morgan The Proximity features allow you to select a section of the map and see which vehicles were near it at the desired time. To start, right-click the area on the map you wish to check and select find proximity. Then select the range of ...ZenduWork - Viewing jobs completed by drivers
This article explains how to view completed jobs or tasks by drivers on ZenduWork. Steps: Please follow the steps mentioned below to check the list of completed jobs: Login to Mygeotab > Go to Zenduwork > Then go to drivers Select data range (For ...