Viewing trips in Zendu-off Road
This article explains how to view trips in Zendu-off Road.
Please note the vehicle must have a Geotab tracker for the data to be pulled
Steps
- Click on the Off-Road add-in
- To see the actual trips, click “Link to Trips” which will lead to Geotab trips
- This will not clarify where the off-road trip was within the page, but you can determine it by yourself by looking closely zooming into the map.
Related Articles
Adjusting the Viewing Angle of the AI-12 - ZenduCAM Z6
Follow this article step by step in order to adjust the viewing angles of both the road and cabin-facing cameras. Steps Dismount the AI-12 camera from the mounting bracket on the windshield. Make sure that the mounting bracket is not attached, as it ...ZenduWork - Viewing jobs completed by drivers
This article explains how to view completed jobs or tasks by drivers on ZenduWork. Steps: Please follow the steps mentioned below to check the list of completed jobs: Login to Mygeotab > Go to Zenduwork > Then go to drivers Select data range (For ...Exporting data in Zendu-off Road
This article explains how to export data in Zendu-off Road. Please note the vehicle must have a Geotab tracker for the data to be pulled Steps 1. Click on the Off-Road add-in 2. Data can be exported as an Excel spreadsheet by clicking ...Viewing your Vehicle/Camera on the map
The Map tap is the default tap that is shown once you log into ZenduCAM. It will show the map, and all the vehicles in your fleet. For more information about any one vehicle, click on the desired vehicle in the tab on the left. This will zoom the map ...SurfSight Z6 - How to set the dashcam viewing angles
To set the view angles: When you are in the parked vehicle with the parking brake on, the ignition on, and the door closed, press the touchscreen of the dashcam to view the PIN screen. Enter the default PIN 3333 to unlock the dashcam for the first ...