Related Articles
Speed test on ZenduCAM Z6
This guide will explain how to perform a speed test on a Z6 device If the ZenduCAM is displaying the live feed as a black screen, please run the speed test to make sure the rate at which the live feed is streaming. This can be done in the physical ...
SS - Z6 Not Powering On
Issue: Z6 Device not turning On Pease try the following steps; • Check if there’s a battery drain kill switch. • Charge it for 15 – 60 minutes with a 2A power source. o If the device is installed and connected to a vehicle, ...
Smartwitness cameras - NVS/Accessory camera not displaying
Steps: Model: CP4 Check the settings on the API, if the settings are right and if the accessory camera is still not reporting. We need to confirm if it's a camera issue or cable issue so that we can replace it accordingly. Inform the customer to ...
Smartwitness cameras - NVS/Accessory camera not displaying
Steps: Model: CP4 Check the settings on the API, if the settings are right and if the accessory camera is still not reporting. We need to confirm if it's a camera issue or cable issue so that we can replace it accordingly. Inform the customer to ...
SS Z6 In vehicle Installation - Hard-wire the Z6 to the Vehicle Fuse Box
Hard-wiring a dashcam to the vehicle’s fuse box is one of the most common installation methods to power your dashcam. In order to utilize the Z6 full features such as active standby, the camera must be connected to a constant 12V power source. NOTE: ...