SW - CP4 Troubleshooting with LED Lights

SW - CP4 Troubleshooting with LED Lights

Troubleshooting:

The CP4 has a solid red light on as well as solid green and blue.  
o Solid red LED indicates that one of the connected cameras is not receiving view signal. Please check the camera’s connection. 

The CP4 red LED is blinking.  
o There is an SD card error/corruption. Please replace the SD card or contact support. 
  1. The new SD card must be initialized with the CP4 Configuration Tool for the device to function properly, and the right settings must be applied.  
  2. IF SD card is blank (not initialized), the CP4 will automatically initialize the SD card, apply the latest NAND settings, during the rebooting process. 
 
The CP4 green LED is blinking or off. 
o The SIM card is not registered with the cellular network. Please verify the SIM is inserted correctly.
o If it looks to be inserted correctly, please remove and re-insert the SIM card and try again
o Power cycle the camera.  


Remote Controller Indicators & LEDs Specifications









    • Related Articles

    • ZenduCAM SW Troubleshooting

      This article explains the multiple methods to troubleshoot the SmartWitness ZenduCAM. Information to Collect Record the information of any hardware that is currently in use: DRID/SERIAL # of the Camera device Vehicle # in which the Camera is ...

    • ZenduCAM CP2/CP4 Troubleshooting Instructions

      Devices Zenducam SW Troubleshooting Information to Collect  Record the information of any hardware that is currently in use: DRID/SERIAL # of the Camera device. Vehicle # in which the Camera is installed SIM card # Indicators Once the ignition is ...

    • ADAS Camera Connectivity Troubleshooting Guide.

      ADAS Camera Connectivity Troubleshooting Guide Connectivity Issue: Through this segment, we can check if the device is connecting to the network and showing the live view on the portal or not. To check for connectivity issues you need to download the ...

    • ZenduCAM Z6 Troubleshooting Instructions

      Devices Z6 Camera troubleshooting Information to Collect  Record the information of any hardware that is currently in use: IMEI of the Camera device SIM card # Make, model, and VIN of the vehicle in which the hardware is installed. Indicators Once ...

    • Smartwitness Camera Basic troubleshooting steps

      This article explains how to complete basic troubleshooting steps for a SmartWitness camera. Steps Follow below troubleshooting steps:       1. Turn off the ignition.       2. Remove the SD card and re-insert it back       3. Remove the SIM card and ...