Speed test on ZenduCAM Z6
This guide will explain how to perform a speed test on a Z6 device
If the ZenduCAM is displaying the live feed as a black screen, please run the speed test to make sure the rate at which the live feed is streaming.
This can be done in the physical camera by going to settings--->Speed test
If the speed is low, Reboot the unit by doing a hard reset.
Related Articles
test
testHow to add Geofences to the ZenduCam portal ?
This article explains how to add Geofences to the ZenduCam portal. Add Geofences Navigate to the “Admin” tab from the top navigation bar. Select “Geofences” from the side navigation bar. Click “Create Zone”. Provide relevant information for the ...How to view a Job in the ZenduCam portal?
This article explains how to view a Job in the ZenduCam portal. Note: You can view jobs, their status, and other relevant details from the job board. Navigate to the job board by clicking on the “Jobs” tab in the header. You can find specific jobs ...How to access reports in the ZenduCam portal ?
This article explains how to access reports in the ZenduCam portal. Jobs Trips Report Navigate to the “Insights” tab from the top navigation bar. Select “Jobs Trips” from the side navigation bar. Filter the report by either vehicles or jobs. (“Jobs” ...How to create a job in the ZenduCam portal ?
This article explains how to create a job in the ZenduCam portal. Job Details Click the “Add Job” button in the top right corner of the “Jobs” home screen. Enter the name of the job in the mandatory “Job Name” field. Enter the internal reference ...