ZenduONE Indoor Site Setup Form

To get started with the ZenduONE Indoor solution, please click here  to load the form below and fill out the required information for the team to review the requirement.

• Related Articles

• ZenduONE Indoor - Reader Configuration

  How to set up a new reader to use with ZenduONE Indoor. To configure a new reader: Take a new Bluetooth Gateway Plug Mini reader out of the box and record the MAC ID, located above the QR code on the side of the reader. Plug the reader into a wall ...

• ZenduONE Indoor - Setup MokoSmart Gateways & Beacons in Office

  Locate the MK100 Gateways and MS M2 Beacons Provided All Readers/Gateways and Beacons are labeled in accordance with the following Google Sheet . Access Trax Backend Proceed to this link . If the link had expired : Proceed to ZenduONE Admin→ Users → ...

• Zendu Maintenance- Add a new facilities and assign it to a site

  Steps: To create a new site.       1. Go to the Asset tab.       2. Click on the ‘+New’ tab.       3. Select the ‘Location or facilities’ option                4. Select the ‘In facility location’ option to assign a facility under a site.       5. ...

• How do drivers complete a Job in ZenduONE ?

  Introduction: This article will guide you through with a step-by-step procedure to complete the Jobs in ZenduONE. Overview The application where the drivers can access the jobs is called “ZenduONE”. It is available on both the iOS and Android app ...

• How to access a Job in the ZenduONE applcation ?

  This article explains how to access a Job in the ZenduONE applcation. Access a Job Note: The application where drivers can access jobs is called “ZenduONE”. The application is available on both the iOS and android app stores. Please ask your drivers ...