Set the dashcam viewing angles

SurfSight Z6 - How to set the dashcam viewing angles

To set the view angles:

  1. When you are in the parked vehicle with the parking brake on, the ignition on, and the door closed, press the touchscreen of the dashcam to view the PIN screen.

  2. Enter the default PIN 3333 to unlock the dashcam for the first time, or your own PIN subsequently.



    See Set and manage your dashcam PIN if you need help with your PIN.

  3. Press Live View.


    Use the arrow keys to toggle between the road-facing and in-cab views.

  4. Use the special screwdriver that was included in the box to loosen the three security screws on the round side of the dashcam. Do not remove the screws fully.

  5. Adjust the viewing angle of the road-facing lens by rotating the body of the dashcam; then adjust the viewing angle of the in-cab lens by rotating the ring. Make sure all the viewing angles are set correctly.

  6. Use Live View to position both the road-facing and in-cab lenses in the proper directions. Use the arrow keys to toggle between the views.


    When a dashcam is in storage, the battery gets completely drained. Before using the dashcam, you need to charge it for an extended period of time, using at least a 2A power source before turning it on.

  7. Tighten the side screws when finished. Once the screws are tightened, the camera can be tilted forwards or backwards (y-axis), but you should not be able to move it sideways (along the x-axis).

    • Related Articles

    • Set and manage your dashcam PIN for Z6 Dashcam

      Procedure: The default PIN is 3333. This PIN is publicly available in our support documentation and website knowledge base. To secure access to the Z6 dashcam, you should change the PIN for your dashcam To Change the PIN: Press the touchscreen of the ...
    • Set the dashcam (Surfsight- Z6) Wifi connection using a QR code

      This article shows how to set the dashcam (Surfsight- Z6) WIFI connection using a QR code To connect the Z6 dashcam to WiFi, make sure you have the dashcam with you, as well as access to the relevant Surfsight Portal account. To connect ...
    • Adjusting the Viewing Angle of the AI-12 - ZenduCAM Z6

      Follow this article step by step in order to adjust the viewing angles of both the road and cabin-facing cameras. Steps Dismount the AI-12 camera from the mounting bracket on the windshield. Make sure that the mounting bracket is not attached, as it ...
    • Connect the auxiliary camera to WiFi using a web browser for Z6 Dashcam

      Procedure: Connect the camera to a 12V power source. Open the internet network on the device you are using to set up the connection. Turn on the WiFi connection for the camera. A new WiFi connection appears on the list: ‘IPCAM-XXXX’ (the serial ...
    • Z6 Camera Specifications

      Element Description Network data Global band Micro-SD 0.59" x 0.47" x 0.029" (15 x 12 x 0.76mm) WiFi Ability to act as hotspot or connect to WiFi Access Point GPS GPS AGPS Road-facing camera 1080P HD adjustable FOV(D)140° wide-angle camera ...