ZenduMA - Scheduled maintenances not visible in the list of assigned work orders -

Procedure:

When a scheduled maintenance trigger is activated, a work order is generated. However, If the Start As Work Order Status is not set to an active control, then the work order will not show up in the list of assigned work orders. The example below has a Start As Work Order Status as Draft. The work order generated from this scheduled maintenance will not be listed in the assigned work orders.

In order to view assigned work orders ensure that the Start As Work Order Status is set to an active control such as Open, Assigned, Work In Progress, or any custom active work order control.

• Related Articles

• ZenduMA - Search a work order

  This article explains how to search for a work order on ZenduMA:  To help search for vast numbers of work orders, utilize the search bar        1. The search bar can be used to search for information in a majority of the selectable columns, i.e Code, ...

• ZenduMaintenance - Print a work order

  This article explains how to print work orders on Zendu Maintenence:  Steps:       1. To print off multiple items, select Work Orders, check off the records and click Print.                      2. Select contents to be included, or excluded from the ...

• Zendu Maintenance - Create Work Order

  Agent: Ashley John Steps:  To create a WO’s against an asset, • Go to the ‘Maintenance’ tab. • Click on ‘Work Orders’. • Click on the ‘+New’ tab. • Then pick up a site for the work order. Once the site is selected it will open a WO page. • The first ...

• Replacing existing Geotab device with the old work orders and scheduled maintenance tied to the new Geotab device

  This article illustrates the step-by-step method of Replacing the existing Geotab device with the old work orders and scheduled maintenance tied to the new Geotab device. Steps       1. log in to Geotab       2. click on vehicles       3. select the ...

• ZenduMA - Adding parts and labor costs to work orders

  This article explains how to add parts and labor to work orders:  Labour To track labour costs on a work order, ensure that each used is assigned an hourly rate. 1. To add an hourly rate, select Settings, Users, and select a user 2. Enter a hourly ...