Reset/Reboot Z6 Dashcam
Procedure:
You can reset the Z6 dashcam using the reset button on its side. There are various reasons to do this, such as:
the dashcam doesn't turn on
Note: Ensure the dashcam is fully charged.
the dashcam screen is frozen
the dashcam is not connecting to the internet
To reset the dashcam:
- Locate the reset button on the side of the dashcam.
- Press the reset button for about five seconds.
Caution: Pressing the button too hard can damage the hardware.
- The reboot menu appears on the dashcam screen.
- Press the SOS button.
- The dashcam restarts.
Related Articles
Z6 Camera Specifications
Element Description Network data Global band Micro-SD 0.59" x 0.47" x 0.029" (15 x 12 x 0.76mm) WiFi Ability to act as hotspot or connect to WiFi Access Point GPS GPS AGPS Road-facing camera 1080P HD adjustable FOV(D)140° wide-angle camera ...Connect the auxiliary camera to WiFi using a web browser for Z6 Dashcam
Procedure: Connect the camera to a 12V power source. Open the internet network on the device you are using to set up the connection. Turn on the WiFi connection for the camera. A new WiFi connection appears on the list: ‘IPCAM-XXXX’ (the serial ...Set and manage your dashcam PIN for Z6 Dashcam
Procedure: The default PIN is 3333. This PIN is publicly available in our support documentation and website knowledge base. To secure access to the Z6 dashcam, you should change the PIN for your dashcam To Change the PIN: Press the touchscreen of the ...Calibrate Z6 Camera
Procedure: NOTE: Before you start, make sure that the vehicle is parked on a level surface with the engine off. To Calibrate the accelerometer: Turn off the vehicle ignition. Check that the dashcam is on. Press the touchscreen of the Z6 dashcam to ...Z6 Dashcam Settings
Procedure: Press the touchscreen of the Z6 dashcam to wake it up. Enter the default PIN 3333 to unlock the dashcam for the first time, or your own PIN subsequently. The screen unlocks and the menu can be viewed. Press Settings to open a menu with the ...