Replacing existing Geotab device with the old work orders and scheduled maintanence tied to the new Geotab device

Replacing existing Geotab device with the old work orders and scheduled maintenance tied to the new Geotab device

This article illustrates the step-by-step method of Replacing the existing Geotab device with the old work orders and scheduled maintenance tied to the new Geotab device.

Steps

      1. log in to Geotab
      2. click on vehicles
      3. select the vehicle


      4. Go to "more details"

      5. Hit "Replace with a new device"
      6. Enter the " serail #" of the new device
      7. Hit "OK"



Please make sure the code on the URL needs to be the same as the one before we replaced the device. As long as it is the same one all the work orders and scheduled maintenance associated with the old Geotab device will be tied to the new one.



In an event of a different code on the URL, please contact support immediately.

    • Related Articles

    • Zendu Maintenance - Create Work Order

      Agent: Ashley John Steps:  To create a WO’s against an asset, • Go to the ‘Maintenance’ tab. • Click on ‘Work Orders’. • Click on the ‘+New’ tab. • Then pick up a site for the work order. Once the site is selected it will open a WO page. • The first ...
    • ZenduMA - Scheduled maintenances not visible in the list of assigned work orders -

      Procedure: When a scheduled maintenance trigger is activated, a work order is generated. However, If the Start As Work Order Status is not set to an active control, then the work order will not show up in the list of assigned work orders. The example ...
    • ZenduMA- Setting up new users on standalone platform

      This article explains how to set up new users in ZenduMaintenance:  There are two types of users in the CMMS, Active and Inactive users. Active users can login to the CMMS. Inactive Users Cannot login to the CMMS. There is no difference when setting ...
    • ZenduMA - Search a work order

      This article explains how to search for a work order on ZenduMA:  To help search for vast numbers of work orders, utilize the search bar        1. The search bar can be used to search for information in a majority of the selectable columns, i.e Code, ...
    • ZenduMaintenance - Print a work order

      This article explains how to print work orders on Zendu Maintenence:  Steps:       1. To print off multiple items, select Work Orders, check off the records and click Print.                      2. Select contents to be included, or excluded from the ...