Proximity Via Map Feature

Proximity Via Map Feature

Agent: Morgan


The Proximity features allow you to select a section of the map and see which vehicles were near it at the desired time.
To start, right-click the area on the map you wish to check and select find proximity. 


Then select the range of the radius and the date you want to search for. Lastly, click "save". Once it's finished loading, you'll be able to see which vehicles entered the selected proximity.



    • Related Articles

    • Viewing your Vehicle/Camera on the map

      The Map tap is the default tap that is shown once you log into ZenduCAM. It will show the map, and all the vehicles in your fleet. For more information about any one vehicle, click on the desired vehicle in the tab on the left. This will zoom the map ...

    • How to create and share a public map using the builder ?

      This article explains how to create and share a public map using the builder. This is the most important part of the ZenduMaps add-on. Creating and sharing public map links takes just a few steps. Navigate to the “Map Builder” link at the top-right ...

    • Logging into ZenduCAM

      This article explains how to log into ZenduCAM. You can log in to your zenduCAM/Trax database here: trax.zenduit.com  If you have a Geotab database, you can log in through Geotab via the ZenduCAM application You do not need to log in again if you're ...

    • Set distracted driver features - Z6

      Procedure: By default, the Distracted Driver feature in the Z6 dashcam is turned On, enabling drivers to receive in-cabin visual and audio alerts whenever a distracted driving event occurs. Only administrators can change this setting, similar to all ...

    • SW Install - CP4 with 4G Camera

      Before installing your device, please document your device serial number. You will need this information at a later time to verify your installation. After completing the installation, please submit the installation details through the following ...