Positioning of DDC - Driver facing camera - SmartWitness
This article demonstrates how to position the DDC- Driver facing camera for SmartWitness, using a diagram.
Diagram
Position the DDC camera as shown in the diagram below.
Related Articles
Driver facing Camera Issues - ZenduCam
Blurry camera/camera not showing on Trax Check for a secure connection between the main camera (KP1S or CP1) and the driver-facing camera. If there is no second camera that is detected, a solid red light will illuminate (review light status flow ...
DDC-200 Driver Distraction Camera Detect & Record Driver Fatigue and Distraction Events
This article explains how to Prevent Accidents with Driver Distraction & Fatigue Monitoring The DDC-200 is the world’s most advanced fatigue detection and driver distraction alert camera. The detection is focused on harmful face, eyes, mouth, and ...
ZenduCAM SW Troubleshooting
This article explains the multiple methods to troubleshoot the SmartWitness ZenduCAM. Information to Collect Record the information of any hardware that is currently in use: DRID/SERIAL # of the Camera device Vehicle # in which the Camera is ...
Smartwitness Camera Basic troubleshooting steps
This article explains how to complete basic troubleshooting steps for a SmartWitness camera. Steps Follow below troubleshooting steps: 1. Turn off the ignition. 2. Remove the SD card and re-insert it back 3. Remove the SIM card and ...
SW Install - CP4 with 4G Camera
Before installing your device, please document your device serial number. You will need this information at a later time to verify your installation. After completing the installation, please submit the installation details through the following ...