Performing hard reset in Z6 Devcie
This article will demonstrate how to do a hard reset on the Z6 camera device.
The camera reset can be done by pressing the reset button for at least 5 seconds on the device itself.
Related Articles
Reset Password for a ZenduONE User
Procedure: Login to ZenduOne Navigate to Users then click on the user you wish to reset the password for: Click on Reset Password then click on Save User: Once you click on Reset password: ( user will receive an email with the new password URL) ...Reset/Reboot Z6 Dashcam
Procedure: You can reset the Z6 dashcam using the reset button on its side. There are various reasons to do this, such as: the dashcam doesn't turn on Note: Ensure the dashcam is fully charged. the dashcam screen is frozen the dashcam is not ...Z6 Camera Specifications
Element Description Network data Global band Micro-SD 0.59" x 0.47" x 0.029" (15 x 12 x 0.76mm) WiFi Ability to act as hotspot or connect to WiFi Access Point GPS GPS AGPS Road-facing camera 1080P HD adjustable FOV(D)140° wide-angle camera ...SS Z6 In vehicle Installation - Hard-wire the Z6 to the Vehicle Fuse Box
Hard-wiring a dashcam to the vehicle’s fuse box is one of the most common installation methods to power your dashcam. In order to utilize the Z6 full features such as active standby, the camera must be connected to a constant 12V power source. NOTE: ...Hard-wire the AI-12 to the Vehicle Fuse Box - ZenduCAM Z6 In vehicle Installation
Hard-wiring a dashcam to the vehicle’s fuse box is one of the most common installation methods to power your dashcam. In order to utilize the AI-12 full features such as active standby, the camera must be connected to a constant 12V power source. ...