Mount an auxiliary camera (Surfsight Z6)
Once you've connected the auxiliary camera to a power source and paired it with the dashcam, mount the camera.
Mounting at different spots of the vehicle enables tracking and video recording of additional perspectives during trips.
Up to four (4) auxiliary cameras can be paired with each dashcam.
This article describes how to mount:
Note
You can purchase additional hose clamps and connect them to rear cameras instead of using a mounting bracket.
Screw the mounting bracket attached to the camera into the vehicle structure at the desired location. The weight of the camera will destroy the skin panels on the doors.
Note
Ensure there is some slack in the cable to allow for adjustment.
Note
You can purchase additional mounting brackets from Lytx®, Inc. and connect them to side cameras instead of using hose clamps.
Place the silicone pad along the top of the camera.
The silicone pad has ridges that enable you to cushion the camera when using the hose clamps for installation, provides a better seal, and prevents scratching.
Slide the hose clamps through the slots at the top of the camera.
Place the hose clamps around the desired location on the vehicle.
Tighten the hose clamps with screws.
Related Articles
SurfSight/Z6 camera - Manual Firmware update
This article explains how to update Surfsight/Z6 camera Firmware manually. Steps Follow the below steps to update the Firmware on the SD card Remove the SD card from the camera and insert the SD card into the Desktop/Laptop Select the SD card folder, ...SurfSight: How install auxiliary cameras?
Here are some ways how to connect aux camera WiFi auxiliary cameras WiFi auxiliary cameras pair to the dashcam through WiFi, and do not need to be physically connected to a router. Using WiFi makes installation easier. In unobstructed environments we ...Z6 Camera Specifications
Element Description Network data Global band Micro-SD 0.59" x 0.47" x 0.029" (15 x 12 x 0.76mm) WiFi Ability to act as hotspot or connect to WiFi Access Point GPS GPS AGPS Road-facing camera 1080P HD adjustable FOV(D)140° wide-angle camera ...Pair the auxiliary camera over Wifi using the Surfsight View app for Z6
Procedure: To pair auxiliary cameras using the app: Install the Surfsight View app from your app store onto an appropriate device. From the device settings, select the auxiliary camera's WiFi. Auxiliary camera WiFi names appear similar to: ...Adjusting the Viewing Angle of the AI-12 - ZenduCAM Z6
Follow this article step by step in order to adjust the viewing angles of both the road and cabin-facing cameras. Steps Dismount the AI-12 camera from the mounting bracket on the windshield. Make sure that the mounting bracket is not attached, as it ...