Insert the SIM and SD cards into the dashcam
Procedure:
To install the SIM and SD cards:
Use the special screwdriver included in the box when you purchased the dashcam to remove the safety screws that lock it.
Insert the SIM and SD cards, as needed

NOTE: Only insert a microSIM card. If you insert a different sized SIM card, it can damage the dashcam.
See the instructions Video Here: Installing SIM and the SD card instructions
Format your SD card.
Press the touchscreen of the Z6 dashcam to wake it up.
Enter the default PIN 3333 to unlock the dashcam for the first time, or your own PIN subsequently.
Press Settings.
Select Format SD card.
Related Articles
Set and manage your dashcam PIN for Z6 Dashcam
Procedure: The default PIN is 3333. This PIN is publicly available in our support documentation and website knowledge base. To secure access to the Z6 dashcam, you should change the PIN for your dashcam To Change the PIN: Press the touchscreen of the ...
Smartwitness Camera Basic troubleshooting steps
This article explains how to complete basic troubleshooting steps for a SmartWitness camera. Steps Follow below troubleshooting steps: 1. Turn off the ignition. 2. Remove the SD card and re-insert it back 3. Remove the SIM card and ...
APN for Flolive sim cards
This article will give you information on the APN for Flolive sim cards. MCC: 222 MNC: 01 APN: flolive.net
Z6 Dashcam Settings
Procedure: Press the touchscreen of the Z6 dashcam to wake it up. Enter the default PIN 3333 to unlock the dashcam for the first time, or your own PIN subsequently. The screen unlocks and the menu can be viewed. Press Settings to open a menu with the ...
Close SD door
Procedure: Please see the below image and ensure that the SD door locking switch is closed.