How to add Geofences to the ZenduCam portal ?
This article explains how to add Geofences to the ZenduCam portal.
Add Geofences
Navigate to the “Admin” tab from the top navigation bar.
Select “Geofences” from the side navigation bar.
Click “Create Zone”.
![](https://lh6.googleusercontent.com/Cg2UoL1MoTxc3TOaTSQk5tQYYPBjjdGDIUsp_4U1jazPe9cYDb3hfY0YwVjQSvn4lfg1Qsua6YLq_LTyFDqOzfWvWrJX3LpCVin7opDhAOUIs966i62aXiE_-juf16sJhuGOHJov_GNvFLHPESGDzHaaCOGqcN1xzVTsYKliIY1LOoEXh2PE8qpf)
Provide relevant information for the geofence.
Use the search bar to search for an address (the system will automatically find the location on the map).
Provide customer details (if the geofence is associated with a customer).
Click “Save” to finalize your changes.
![](https://lh6.googleusercontent.com/EcF3q-hrqNKfzYu9RbmY2VYmed_pRbMPB5fKBJVCgRXEGunAB9yx6cwTgYchujRFehpNfc3P5aG0ShO0FJkCVRghMQqDCuC_N2AKWrXjRFav-y4sizy9NTydrJ_UGBsEf0RRCkSnnG-gY7BYg0Zo1ZSuarlx6APkoF9y7BYpqorp8SDX4TV0Ex1X)
You can edit a geofence by clicking on it within the “Geofences” list.
Related Articles
How to create a job in the ZenduCam portal ?
This article explains how to create a job in the ZenduCam portal. Job Details Click the “Add Job” button in the top right corner of the “Jobs” home screen. Enter the name of the job in the mandatory “Job Name” field. Enter the internal reference ...
TRAX - Steps to create and delete Geofences
This article explains how to create geofences on TRAX. Steps 1. Login to TRAX portal 2. Go to Admin > Then select Geofences 3. Click on Create Zone 4. Add customer name/zone name 5. Select all the groups ...
How to view a Job in the ZenduCam portal?
This article explains how to view a Job in the ZenduCam portal. Note: You can view jobs, their status, and other relevant details from the job board. Navigate to the job board by clicking on the “Jobs” tab in the header. You can find specific jobs ...
How to access reports in the ZenduCam portal ?
This article explains how to access reports in the ZenduCam portal. Jobs Trips Report Navigate to the “Insights” tab from the top navigation bar. Select “Jobs Trips” from the side navigation bar. Filter the report by either vehicles or jobs. (“Jobs” ...
ZenduCAM- Add/Delete groups
This article will explain how to add, edit and delete groups in ZenduCAM. Steps Adding a Group: 1. Login to the ZenduCAM portal 2. Go to the 'Admin' tab 3. Click on the 'Create Group' button 4. Enter the group name in 'Input ...