ZenduCAM offline reports

How do drivers complete a Job in ZenduONE ?

Introduction:

This article will guide you through with a step-by-step procedure to complete the Jobs in ZenduONE.

Overview

The application where the drivers can access the jobs is called “ZenduONE”. It is available on both the iOS and  Android app stores. Please ask your drivers to download this application on their phones or tablets.

Procedure

  1. Once you arrive at the stop location, you will be prompted to complete the delivery. Alternatively, you can click on the stop to complete the delivery.

  2. When prompted, click “Complete Delivery”.

  3. Select the work order you wish to complete.

  4. If necessary, you can add comments for your supervisor here.

  5. Select the products or parcels related to the stop.

  6. Fill out the other available fields.

  7. Once you are done, click “Complete”.

  8. Complete other pending work orders by repeating steps 3-7.

  9. Resume your job and navigate to the next stop. Complete deliveries for other stops by repeating steps 1-8.

So through the above steps, the drivers can complete the jobs as well. 

    • Related Articles

    • How to access a Job in the ZenduONE applcation ?

      This article explains how to access a Job in the ZenduONE applcation. Access a Job Note: The application where drivers can access jobs is called “ZenduONE”. The application is available on both the iOS and android app stores. Please ask your drivers ...

    • ZenduONE App - How can drivers access jobs on mobile?

      Introduction: This article will guide you through with a step-by-step procedure to help the drivers athe Jobs in ZenduONE. Overview The application where the drivers can access the jobs is called “ZenduONE”. It is available on both the iOS and ...

    • How to view a Job in the ZenduCam portal?

      This article explains how to view a Job in the ZenduCam portal. Note: You can view jobs, their status, and other relevant details from the job board. Navigate to the job board by clicking on the “Jobs” tab in the header. You can find specific jobs ...

    • ZenScore - Add new drivers

      Zenscore This Geotab addin allows you to monitor your drivers' performance. If you wish to add more drivers to monitor in the addin, you can add a driver manually by following the steps mentioned below. Steps: To add a new driver to ZenScore: 1.Go to ...

    • Drivers Are Not Auto Assigned When an Order is Placed via Marketplace

      Confirm Vehicle Association with Order/Product Verify that the vehicle is linked to the specific order or product in the system. Ensure Driver is Logged into ZenduOne Mobile App Check that the driver has logged into the ZenduOne Mobile app to allow ...