Driver facing Camera Issues - ZenduCam

Driver facing Camera Issues - ZenduCam

Blurry camera/camera not showing on Trax

  1. Check for a secure connection between the main camera (KP1S or CP1) and the driver-facing camera. If there is no second camera that is detected, a solid red light will illuminate (review light status flow chart)

  2. Most times, there will be an extension cable between the main camera and the driver-facing camera. Ensure that this cable is not faulty by removing the extension cable, and trying a direct connection to the main camera

  3. No video continues to show with a direct connection, submit a ticket on the support portal outlining the troubleshooting steps that were taken. 

  4. If the camera is blurry, wipe the lens, and see if this helps. If it remains blurry, submit a ticket to support


    • Related Articles

    • Positioning of DDC - Driver facing camera - SmartWitness

      This article demonstrates how to position the DDC- Driver facing camera for SmartWitness, using a diagram. Diagram Position the DDC camera as shown in the diagram below.

    • SW Install - CP4 with 4G Camera

      Before installing your device, please document your device serial number. You will need this information at a later time to verify your installation. After completing the installation, please submit the installation details through the following ...

    • How to view a Job in the ZenduCam portal?

      This article explains how to view a Job in the ZenduCam portal. Note: You can view jobs, their status, and other relevant details from the job board. Navigate to the job board by clicking on the “Jobs” tab in the header. You can find specific jobs ...

    • How to create a job in the ZenduCam portal ?

      This article explains how to create a job in the ZenduCam portal.  Job Details Click the  “Add Job” button in the top right corner of the “Jobs” home screen. Enter the name of the job in the mandatory “Job Name” field. Enter the internal reference ...

    • How to access reports in the ZenduCam portal ?

      This article explains how to access reports in the ZenduCam portal.  Jobs Trips Report Navigate to the “Insights” tab from the top navigation bar. Select “Jobs Trips” from the side navigation bar. Filter the report by either vehicles or jobs. (“Jobs” ...