Close SD door

Close SD door

Procedure:

Please see the below image and ensure that the SD door locking switch is closed.


    • Related Articles

    • Media Error

      Procedure: Error Type Explanation Actions to be taken Write Error Data cannot be written due to SD corruption or reserve sectors full. Format SD Card Note: Please contact support before formatting the SD card, since the configuration will differ for ...
    • Smartwitness Camera Basic troubleshooting steps

      This article explains how to complete basic troubleshooting steps for a SmartWitness camera. Steps Follow below troubleshooting steps:       1. Turn off the ignition.       2. Remove the SD card and re-insert it back       3. Remove the SIM card and ...
    • How to export manual NVS and Media error report from ZenduCam.

      Introduction: This will guide you step-by-step procedure to export the Error report file from ZenduCam for NVS and Media error. Procedure: Login to ZenduMA. Click on the Admin tab. Click on Schedule report.  If there is no report created then click ...
    • ZenduCAM SW Troubleshooting

      This article explains the multiple methods to troubleshoot the SmartWitness ZenduCAM. Information to Collect Record the information of any hardware that is currently in use: DRID/SERIAL # of the Camera device Vehicle # in which the Camera is ...
    • SmartWitness Camera - Retrieve video manually from SD card

      This article explains how to retrieve videos manually from the SD card for specific camera models. Camera Models CP1 CP2 KP1/KP1S CP4 Steps Download the SD card viewer software from the below link: ...