Adjusting the Viewing Angle of the AI-12- ZenduCAM Z6

Adjusting the Viewing Angle of the AI-12 - ZenduCAM Z6

Follow this article step by step in order to adjust the viewing angles of both the road and cabin-facing cameras.

Steps

  1. Dismount the AI-12 camera from the mounting bracket on the windshield. Make sure that the mounting bracket is not attached, as it locks the camera into position.
  2. Use the screwdriver to loosen the three security screws on the round side of the camera. Do not remove the screws fully.
  3. Adjust the viewing angle by rotating the body of the AI-12 and lock the three side screws when finished.
  1. Mount the camera back onto the windshield.
  2. Connect the camera to a power source. 
  3. The camera will turn on automatically.
  4. To unlock the camera touch screen enter a default PIN number 3333.
  1. On the main screen enter the ‘Live View’ mode.
  1. Use the ‘Live View’ to direct both the road and cabin facing cameras to the proper directions. You can use the arrow keys to switch between the views.
  2. Dismount the camera from the windshield and screw in the security screws all the way. Mount the camera back on the windshield.

    • Related Articles

    • Z6 Camera Specifications

      Element Description Network data Global band Micro-SD 0.59" x 0.47" x 0.029" (15 x 12 x 0.76mm) WiFi Ability to act as hotspot or connect to WiFi Access Point GPS GPS AGPS Road-facing camera 1080P HD adjustable FOV(D)140° wide-angle camera ...

    • SurfSight Z6 - How to set the dashcam viewing angles

      To set the view angles: When you are in the parked vehicle with the parking brake on, the ignition on, and the door closed, press the touchscreen of the dashcam to view the PIN screen. Enter the default PIN 3333 to unlock the dashcam for the first ...

    • SurfSight/Z6 camera - Manual Firmware update

      This article explains how to update Surfsight/Z6 camera Firmware manually. Steps Follow the below steps to update the Firmware on the SD card Remove the SD card from the camera and insert the SD card into the Desktop/Laptop Select the SD card folder, ...

    • How to view a Job in the ZenduCam portal?

      This article explains how to view a Job in the ZenduCam portal. Note: You can view jobs, their status, and other relevant details from the job board. Navigate to the job board by clicking on the “Jobs” tab in the header. You can find specific jobs ...

    • Install ZenduCAM M1N

      ZenduCAM M1N Installation Guide Schematic Diagram of Equipment Connection List Of Product Material Product Name Picture Notes M1N DVR Unit Main DVR unit which cameras, power, Cellular/GPS/WIFI Antenna will be connected to MINI key Key needed to ...